THE LUNCH NOTEBOOK

Cleaning Blenders and Thermoses

How to clean a blender jar and a thermos flask after a packed lunch, with baking soda, warm water, and cleaning tablets, plus tips to stop odors.

9 min read1 views
— · 0 votes
Contents
  1. Why these two items need different care
  2. Rinse the blender jar right after pouring
  3. Wash the blender parts without harm
  4. Soak stubborn stains with baking soda
  5. Clean a thermos flask after each use
  6. Remove odor and stains from a flask
  7. Handle the seals, caps, and gaskets
  8. Build a simple weekly routine
  9. Questions about cleaning blenders and thermoses
  10. Can I clean a blender jar by running it with soap and water?
  11. How do I get the coffee smell out of a thermos flask?
  12. Is baking soda safe for cleaning a blender jar?
  13. Can I put the thermos flask or blender jar in the dishwasher?
  14. What are cleaning tablets and when do I use them?
  15. How should I store a thermos flask between lunches?

Cleaning blenders and thermoses means washing the blender jar so no food residue dries on the blades, and rinsing the thermos flask so old drink smells do not build up inside. Both items are rinsed or washed soon after use, then dried with the lid off so air reaches every surface. A little baking soda handles stains and odors that plain washing leaves behind.

  • Rinse the blender jar and the thermos flask soon after use, before residue dries hard.
  • Warm water with dish soap clears everyday food and drink film from both items.
  • Baking soda lifts stains and neutralizes odors in a thermos flask and a blender jar.
  • Cleaning tablets suit a thermos flask that has held coffee or tea and keeps a stale smell.
  • Dry both items with the lid off so trapped moisture does not turn into odor.

Why these two items need different care

A blender jar and a thermos flask hold food in different ways, so they collect dirt in different places. The blender jar takes blades, a gasket, and often a tight lid with a fill cap, and food packs into those small parts. The thermos flask has a narrow neck and a deep body, so liquid sits in the base and coats the inner wall.

Heat and dairy make the work harder in a blender jar, since residue can bake onto the blade area after a hot soup. Sweet drinks and coffee leave a film inside a thermos flask that water alone does not shift. Knowing which residue you face tells you whether soap, soaking, or a cleaning tablet is the right tool.

Neither item enjoys a dishwasher unless its maker says it is safe there. Heat and strong detergent can cloud a clear jar or damage the vacuum seal of a flask. Hand washing protects the parts that keep each item working, and it takes only a few minutes after a lunch.

Rinse the blender jar right after pouring

Rinsing the blender jar starts the cleaning before food sets, and it removes the bulk of residue in seconds. Fill the jar partway with warm water, run the blender briefly, and pour the water out. This loosens food from the blades and the lower wall while it is still soft.

A blender jar that held a thick smoothie or a soup needs a second pass with dish soap and warm water. Add a drop of soap and water, run the blender on a low setting, then rinse until no suds remain. Take the jar apart afterward, because the gasket and the blade base trap food that the rinse cannot reach.

Wash the lid and the fill cap by hand in warm soapy water, then rinse them well. Food hides in the threads and the cap seal, and that trapped food turns sour between lunches. A soft brush reaches the corners of the lid without scratching the plastic.

  • Pour out the contents and rinse the jar with warm water.
  • Add dish soap and warm water, then run the blender briefly.
  • Rinse until the water runs clear and no suds remain.
  • Remove the blade base and gasket and wash them by hand.
  • Wash the lid and fill cap, then rinse the threads.
  • Stand every part to air dry with the jar open.

Wash the blender parts without harm

Blender jar cleaning is gentle work, and harsh tools can do more damage than the food did. A soft sponge or a bottle brush clears the walls, and a brush with a narrow tip reaches behind the blades. Steel wool and scouring powder scratch clear plastic and dull the finish.

The gasket is the soft ring that seals the blade base, and it needs its own rinse. Lift it out, wash it in warm soapy water, and check that no film or grit sits in its groove. A worn or stretched gasket lets liquid leak, so refit it flat and in place.

Dry the jar upside down on a rack with the lid off, and leave the parts apart until they are dry. Moisture trapped in the blade base or under the gasket encourages a musty smell. Assembling a dry jar keeps the next smoothie free of yesterday's flavor.

  • Use a soft sponge or a bottle brush for the walls.
  • Reach behind the blades with a narrow brush.
  • Wash the gasket in warm soapy water and check its groove.
  • Skip steel wool and scouring powder on plastic.
  • Dry the jar upside down with the lid off.
  • Refit the gasket and blade base only when dry.

Soak stubborn stains with baking soda

Baking soda lifts stains and odors from a blender jar when soap alone leaves a film behind. Sprinkle a spoonful into the jar, add warm water, and let it stand so the paste works on the residue. Then scrub with a soft brush and rinse well.

A thick paste of baking soda and a little water suits stains on the jar wall and the lid. Rub the paste on with a sponge, wait, then rinse and wash as normal. Baking soda is mildly abrasive, so use light pressure on clear plastic to keep it clear.

Odors from garlic, onion, or fish respond to the same treatment in the blender jar. A soak in warm water with baking soda, followed by a normal wash, leaves the jar smelling clean. Rinse twice so no gritty film stays behind on the blades.

Clean a thermos flask after each use

Thermos flask cleaning begins with a rinse as soon as the drink is finished, because liquid left in the base turns stale. Fill the flask partway with warm water, close the lid, and shake it, then pour it out. Warm water with a drop of dish soap clears most drink residue.

A bottle brush reaches the inner wall and the base of a deep flask that a sponge cannot touch. Wash the cap, the stopper, and any cup by hand, since drink collects in their threads and seals. Rinse every part until the water runs clear and no soap remains.

Dry the thermos flask with the lid off and the body upside down on a rack. Air moving through the open neck carries moisture out of the base. Store the flask open, because a closed lid over a damp interior traps the smell of the last drink.

Remove odor and stains from a flask

Coffee and tea leave a brown film that settles into the wall of a thermos flask over time. Baking soda handles that film: put a spoonful in the flask, add warm water, and let it stand before brushing. Rinse well, then wash with dish soap and rinse again.

Cleaning tablets made for flasks and bottles dissolve in warm water and reach the base without scrubbing. Drop one in, fill with warm water as the tablet label directs, and leave it to work. Rinse the flask thoroughly afterward so no tablet residue stays in the drink.

A mix of warm water and a little vinegar also cuts the film, and the acid helps with mineral marks. Rinse the flask after the vinegar soak, then wash it with soap so no sour taste carries over. Do not mix vinegar and baking soda in a closed flask, because the fizz builds pressure.

Handle the seals, caps, and gaskets

The cap and the seal on a thermos flask hold the drink in, and they also hold onto smells. Take the cap apart where the maker allows it, then wash each piece in warm soapy water. A small brush clears the threads, and a rinse removes the soap from every groove.

Rubber seals and gaskets can hold odor even when the flask body is clean. Soak the seal in warm water with baking soda, then rinse and dry it before refitting. Replace a seal that is cracked or no longer fits snugly, since a poor seal lets drinks leak into a lunch bag.

Blender jar lids and fill caps need the same attention as flask caps. Wash the threads and the cap seal by hand, and let them dry before you close the jar. A clean seal keeps the lid tight and keeps old flavors out of the next blend.

Build a simple weekly routine

A short routine keeps both items ready for the next packed lunch without a long scrub. Rinse after each use, wash with warm soapy water at the end of the day, and dry with the lid off. Once a week, give the flask a baking soda soak and the blender jar a deeper wash of its parts.

Check the gaskets and seals during the weekly wash, and look for film or grit in the grooves. A soft brush and a little baking soda clear both. Note any part that is worn, cracked, or no longer sealing, and replace it before it leaks.

Store the blender jar open and the thermos flask with its lid off so air reaches the inside. A dry, open item stays fresher between lunches, and the next rinse is quicker. Keep the parts together in one spot so the wash does not get skipped.

Questions about cleaning blenders and thermoses

Can I clean a blender jar by running it with soap and water?

Yes, a blender jar can be cleaned by running it briefly with warm water and a drop of dish soap. Pour out the sudsy water, rinse until clear, then take the blade base and gasket apart for a hand wash. The run with soap loosens food, but it does not reach the parts that trap residue.

How do I get the coffee smell out of a thermos flask?

A baking soda soak removes the coffee smell from a thermos flask. Put a spoonful of baking soda in the flask, add warm water, and let it stand before brushing and rinsing. A cleaning tablet or a vinegar and water soak also works on the film that holds the smell.

Is baking soda safe for cleaning a blender jar?

Baking soda is safe for cleaning a blender jar when you rinse it well afterward. It is mildly abrasive, so rub it on clear plastic with light pressure and a soft sponge. Rinse twice so no gritty film stays on the blades or the wall.

Can I put the thermos flask or blender jar in the dishwasher?

Only put a thermos flask or blender jar in the dishwasher when its maker says it is safe there. Heat and strong detergent can cloud a clear jar or damage the vacuum seal of a flask. Hand washing protects the parts that keep each item working.

What are cleaning tablets and when do I use them?

Cleaning tablets are tablets made for flasks and bottles that dissolve in warm water and lift film from the inner wall. Use one in a thermos flask that has held coffee or tea and keeps a stale smell. Follow the tablet label for the amount of water, then rinse the flask thoroughly.

How should I store a thermos flask between lunches?

Store a thermos flask with the lid off and the body upside down on a rack so air reaches the inside. A closed lid over a damp interior traps the smell of the last drink. Keep the flask open until it is fully dry, then fit the lid loosely.

Read next

Latest articles