THE LUNCH NOTEBOOK

Homemade Spice Rub Recipe

Mix your own dry rub from pantry spices, then adjust it for chicken, ribs, steak, wings or turkey. Includes a base ratio, flavor swaps and food safety.

9 min read10 viewsHomemade Spice Rub Recipe
— · 0 votes
Contents
  1. What a dry rub is made of
  2. A base ratio you can change
  3. Mixing your own barbecue rub
  4. Rub amounts and resting time
  5. Adjusting a rub for each meat
  6. Rubs for steak, wings and ribs
  7. Herb and spice rubs and ready-made blends
  8. Storing the blend and handling raw meat
  9. Questions about homemade spice rub
  10. What is the difference between a dry rub and a wet marinade?
  11. Can I make my own dry rub for chicken without sugar?
  12. How long should a rub sit on the meat before cooking?
  13. Can I use a spice rub on smoked turkey breast?
  14. How do I use a Cape herb and spice rub?
  15. How should I store a homemade spice rub?

A homemade spice rub recipe is a mix of salt, sugar and ground spices that you pat onto meat before cooking. You build it from a simple base ratio, then change the sugar and spice levels to suit chicken, ribs, steak, wings or turkey breast. Mixing your own lets you control the salt and match the rub to how you cook.

  • Build a rub from a base of salt, brown sugar, paprika, garlic powder and black pepper, then adjust each part to taste.
  • Use more brown sugar for pork and chicken cooked over low heat, and less sugar for steak over high heat.
  • Pat the rub onto dry meat and let it sit so the salt seasons the surface before cooking.
  • Store the blend in a sealed jar away from heat and light, and label it with the mix and the date.

What a dry rub is made of

A dry rub is a blend of dry seasonings applied to the outside of meat before cooking. The blend combines salt, a sweetener, a warm spice and an aromatic spice in proportions you choose. A barbecue rub is the same idea with more sugar and smoked paprika in the mix.

Salt carries the seasoning into the meat and firms the surface, while brown sugar adds sweetness and helps the crust darken. Smoked paprika, garlic powder and black pepper give the deep flavor people expect from a grilling seasoning. A herb and spice rub swaps some of the spice for dried thyme, oregano or rosemary.

Grind whole spices fresh when you can, since ground spices lose aroma over time. Mix the blend in a bowl and break up any lumps of brown sugar with your fingers. A jar of homemade dry rub keeps its flavor longer when you store it sealed and away from the stove.

A base ratio you can change

A base ratio for a homemade spice rub recipe uses one part salt, one part brown sugar, two parts paprika and half a part each of garlic powder and black pepper. This gives a balanced starting blend that you can taste and adjust before it touches meat. Keep the ratio in mind and scale it up or down by the spoonful.

Paprika sets the color and the mild warmth, so use smoked paprika when you want a deeper barbecue flavor. Garlic powder and onion powder add savoriness, while cayenne or chili powder brings heat. Ground cumin and mustard powder suit beef, and dried herbs suit poultry and pork.

Taste the blend on its own and then on a small piece of cooked meat, because raw rub tastes saltier than the finished crust. Reduce the salt when you plan to brine the meat first. Write down each change so you can repeat the blend you like.

Mixing your own barbecue rub

To make your own BBQ rub, measure the spices into a bowl and stir until the color is even. Break up clumps of brown sugar so the blend spreads evenly over the meat. A whisk or a fork works well for a small batch.

Keep the sugar level moderate when you cook over high heat, since sugar burns before the meat is done. For ribs and chicken cooked low and slow, a sweeter rub builds a dark crust without scorching. For steak and wings over direct heat, cut the sugar and lean on paprika, pepper and garlic.

Make a batch large enough for a few meals so you are not mixing every time, and keep it in a sealed jar. Add a label with the blend name and the mixing date. A batch stays fresher when you scoop with a dry spoon and never with wet hands.

Rub amounts and resting time

Use enough rub to coat the meat in a thin, even layer, and pat it in rather than piling it on. Excess rub falls off and burns on the grill, so brush off the loose powder. A light coating seasons the surface without overpowering the meat.

Let the rubbed meat rest in the refrigerator so the salt can draw moisture and seasoning into the surface. The time depends on the thickness of the cut and the amount of salt in the rub. Thin cuts need less resting than a thick roast.

Bring the meat out of the refrigerator shortly before cooking so it heats evenly. Pat away any pooled liquid before the meat goes on the grill or in the oven. A dry surface browns better than a wet one.

Adjusting a rub for each meat

A dry rub recipe for chicken balances salt, sugar and paprika with garlic and pepper. Chicken skin holds the rub well, so work a little under the skin as well as on top. A spice rub recipe for chicken can add dried thyme or oregano for an herby note.

Rib rub leans sweet and smoky, with more brown sugar and smoked paprika than a chicken blend. A steak rub uses less sugar and more coarse black pepper, garlic and cumin. A wing rub sits between the two, with moderate sugar and a pinch of cayenne for heat.

A dry rub for turkey breast needs care because the meat is lean and dries out easily. Keep the salt moderate, add dried sage or thyme, and rub the breast under the skin. A smoked turkey seasoning can include smoked paprika and a little sugar for color.

Rubs for steak, wings and ribs

A steak rub works on a hot surface, so keep sugar low and use coarse salt and cracked pepper as the base. Add garlic powder and a little cumin for a deeper flavor. Apply the rub just before cooking so the salt does not draw too much moisture to the surface.

A wing rub coats small pieces fast, so use a modest amount and toss the wings in a bowl to spread it. A little baking powder in a wing rub helps the skin crisp, but keep it separate from the salt until you mix. Cook wings over moderate heat so the sugar does not burn.

A rib rub goes on a day ahead when you have time, since ribs are thick enough to take a longer rest. Pat the rub over the whole rack and wrap it in the refrigerator. Brush off loose powder before the rack goes on the smoker or in the oven.

Herb and spice rubs and ready-made blends

An herb and spice rub replaces part of the paprika with dried herbs such as thyme, oregano and rosemary. This style suits poultry, pork and vegetables and gives a lighter flavor than a sweet barbecue blend. Crush dried herbs between your fingers before mixing so they release their aroma.

A ready-made blend such as a Cape herb and spice rub is used the same way as a homemade one. Read the label to see how much salt it contains, then adjust the salt in your own cooking. Pat the blend onto dry meat and let it rest before cooking.

A purchased rub is a shortcut when you are short on time, while a homemade blend lets you control the salt and heat. Both work on the grill, in the oven and in a smoker. Store either one sealed and away from heat.

Storing the blend and handling raw meat

Store homemade dry rub in a sealed jar in a cool, dark place, and label it with the mix and the date. Moisture is the main enemy, so keep the jar closed and use a dry spoon. Discard any blend that clumps or smells stale.

Keep raw meat and used rub away from ready-to-eat food, and wash hands, boards and knives after contact. Discard rub that touched raw meat, or any marinade or rub mixture that sat with the meat. Use a clean spoon each time you scoop from the jar.

Cook meat to a safe internal temperature, and check thick cuts with a food thermometer. Poultry and ground meat need higher internal temperatures than whole cuts of beef. When in doubt about doneness, keep cooking and check again.

Questions about homemade spice rub

What is the difference between a dry rub and a wet marinade?

A dry rub is a blend of dry spices patted onto the surface of meat, while a wet marinade is a liquid that the meat sits in. A dry rub builds a crust and seasons the surface, and a marinade adds moisture and flavor deeper into thin cuts. Some cooks use a dry rub first and then a light glaze near the end of cooking.

Can I make my own dry rub for chicken without sugar?

Yes, a dry rub for chicken works without sugar, and the blend relies on salt, paprika, garlic and pepper for flavor. Sugar mainly helps browning and sweetness, so leaving it out suits people who want a savory rub. Without sugar the crust browns less, so watch the heat and turn the chicken as it cooks.

How long should a rub sit on the meat before cooking?

The time a rub should sit depends on the thickness of the cut and the salt level in the blend. Thin cuts such as wings and steaks need a short rest, while thick cuts and whole birds take longer. Rest the meat in the refrigerator and pat off excess liquid before cooking.

Can I use a spice rub on smoked turkey breast?

Yes, a spice rub suits smoked turkey breast when the blend is moderate in salt and includes herbs such as sage or thyme. Loosen the skin and rub some of the blend underneath as well as on top. Smoke the breast at a low temperature and check the internal temperature with a thermometer.

How do I use a Cape herb and spice rub?

Use a Cape herb and spice rub the same way as any dry blend by patting it onto dry meat before cooking. Check the label first, since a ready-made blend may already contain salt. Taste a small amount before adding extra salt to the dish.

How should I store a homemade spice rub?

Store a homemade spice rub in a sealed jar in a cool, dark place and label it with the mix and the date. Moisture and heat speed up the loss of aroma, so keep the jar closed and away from the stove. Use a dry spoon and discard any blend that clumps or smells stale.

Read next

Latest articles