THE LUNCH NOTEBOOK

How to Clean a Plastic Cutting Board

A plain guide to washing a plastic cutting board by hand or in the dishwasher, sanitizing it after raw meat, and keeping knife marks clean and dry.

8 min read8 viewsHow to Clean a Plastic Cutting Board
— · 0 votes
Contents
  1. Wash the board after every use
  2. Sanitize plastic after raw meat
  3. Hand washing or the dishwasher
  4. Dry the board completely
  5. Deal with knife marks and stains
  6. Keep raw and ready foods apart
  7. Care that keeps the board usable
  8. Questions about cleaning plastic cutting boards
  9. How do I clean a plastic cutting board?
  10. How do I wash a plastic cutting board by hand?
  11. How can I sanitize a plastic cutting board?
  12. Can a plastic cutting board go in the dishwasher?
  13. What should I do about deep knife marks in a plastic board?

Cleaning a plastic cutting board means washing off food residue with hot water and dish soap, scrubbing the whole surface, then rinsing and drying it fully. Sanitizing goes one step further and kills germs left behind after the wash. Plastic boards take both steps well because they are non-porous, but knife marks need attention.

  • Wash a plastic cutting board with hot water and dish soap after every use, and scrub both faces, not just the top.
  • Rinse off the soap and dry the board completely before you put it away.
  • Sanitize a plastic board after it touches raw meat, poultry or fish.
  • Check the board for deep knife marks where food residue can sit and the wash cannot reach.
  • Follow the maker's label before you put a plastic board in the dishwasher.

Wash the board after every use

Washing a plastic cutting board starts the moment you finish cutting. Scrape loose scraps into the bin so the sink does not clog and the board is easier to scrub. Hot water and dish soap lift grease and food residue from the plastic surface. A plastic board does not soak up liquid the way wood does, so the wash stays on the surface.

Run hot water over the whole board and add a squeeze of dish soap. Scrub both faces with a sponge or a dish brush, working along the knife marks and the edges. The rim and the handle area collect residue that a quick wipe misses. Give the scrubbing a little time rather than a fast pass.

Rinse the board under hot water until the soap is gone. Feel the surface with your fingers and wash again if any film remains. Soap left on the plastic can leave a taste on the next food you cut. Set the board where air can reach both sides.

Sanitize plastic after raw meat

Plastic cutting board sanitizing matters after the board holds raw meat, poultry, fish or eggs. Washing removes what you can see, but germs can stay in the scratches. A sanitizing step lowers that risk before the board is used again. Do the wash first, because a sanitizer works on a clean surface.

Use a sanitizing product made for food contact surfaces and follow its label for the strength and the contact time. A diluted household bleach solution is another option where local guidance allows it, mixed fresh and used with care. Keep the board wet with the solution for the time the label states. Rinse the board with clean water afterward unless the label says not to.

Sanitize the board on both faces and along the edges, not only the middle. Let the solution reach the knife marks where residue collects. Wear gloves if the product label advises it and keep the room ventilated. Store the sanitizer out of reach of children.

Hand washing or the dishwasher

Washing by hand suits any plastic board and puts you in control of the scrubbing. The dishwasher adds heat and a longer wash, which helps with greasy residue. Not every plastic board is dishwasher safe, so the maker's label decides. Check the label before the first run, not after.

A dishwasher-safe board goes on the top rack where the heat is gentler. Place it so water can flow over both faces and nothing presses against it. A board that warps in the wash may no longer sit flat for cutting. Hand washing is the safer route for a thin or flexible board.

A board that is not marked dishwasher safe stays in the sink. Heat in a dishwasher can warp thin plastic and loosen a rubber foot. Hand washing takes a few minutes and protects the shape of the board. Either method still needs full drying afterward.

MethodWhat it suitsWhat to watch
Hand washingAny plastic board, thick or thinScrub both faces and the knife marks
Dishwasher, top rackBoards labeled dishwasher safeWater flow around the board, no warping

Dry the board completely

Drying a plastic board is part of cleaning it, not an afterthought. Water left on the surface keeps the board damp and can encourage germs. Stand the board on its edge so air reaches both faces. A dish rack with space between the items works well.

Wipe the board with a clean towel first if you need it dry quickly, then let air finish the job. Do not stack a wet board against another board or a wall. Trapped water between two surfaces stays there for a long time. A dry board is ready for the next meal.

Store the board only when it feels dry to the touch. A cupboard with poor airflow holds moisture, so a slightly damp board can stay damp inside. Check the feet and the handle, which hold water longer than the flat surface. Dry storage keeps the plastic free of smells.

Deal with knife marks and stains

Knife marks are the weak point of any plastic cutting board. Deep cuts hold food residue and moisture beyond the reach of a sponge. Shallow marks clean up in a normal wash, while deep ones need a closer look. Hold the board up to the light to judge how deep they go.

Deep cleaning plastic means working at those marks with a brush and hot soapy water. A paste of baking soda and water can lift color and smell from the surface. Let the paste sit for a short while, then scrub and rinse well. Do not scrape the board with a metal tool, which adds new grooves.

A board with cuts deep enough to catch a fingernail is hard to clean properly. Replace that board rather than keep scrubbing at it. Deep grooves also weaken the plastic and speed up further damage. A flat, smooth board is easier to keep clean.

Keep raw and ready foods apart

A clean board still needs a plan for what goes on it. Raw meat, poultry and fish leave germs that a ready-to-eat food should not meet. Use a separate board, or a different colored board, for raw meat and for bread, salad and cooked food. Color coding makes the choice automatic.

Wash the raw-meat board and sanitize it before anything else touches it. Keep it away from the sink area where clean dishes sit. A board used for raw food should not double as a serving platter. Serve cooked food on a clean plate instead.

Wash your hands after handling the raw board and before you touch other food. Clean the knife as well, since it shared the surface. A small kitchen still has room for two boards, one for raw food and one for the rest.

Care that keeps the board usable

A plastic cutting board lasts longer with a few habits. Wash it soon after use so residue does not dry hard. Skip harsh scouring pads that scratch the surface and create new hiding places. Store the board flat or on edge, away from heavy pans.

Keep the board away from direct heat such as a hot pan or an oven rack. Plastic softens and warps when it gets too hot. Let the board cool before washing if hot food sat on it. A warped board rocks and makes cutting unsafe.

Inspect the board every so often for cracks, deep cuts and a rough surface. A worn board is a tool to replace, not to force. Replacement depends on how often you cook and how the board is washed. A smooth surface is the sign of a board that still cleans well.

Questions about cleaning plastic cutting boards

How do I clean a plastic cutting board?

Clean a plastic cutting board by washing it with hot water and dish soap, scrubbing both faces, then rinsing and drying it fully. Sanitize the board after raw meat, poultry or fish with a product made for food contact surfaces. Check the label before putting the board in a dishwasher.

How do I wash a plastic cutting board by hand?

Wash a plastic cutting board by hand under hot running water with dish soap and a sponge or brush. Scrub the flat faces, the edges and the knife marks, then rinse until no soap remains. Stand the board on its edge so both sides dry.

How can I sanitize a plastic cutting board?

Sanitize a plastic cutting board after washing it, using a sanitizing product made for food contact surfaces and following its label for strength and contact time. Keep both faces wet for the stated time, then rinse if the label says so. Wear gloves if the label advises it.

Can a plastic cutting board go in the dishwasher?

A plastic cutting board can go in the dishwasher only when the maker labels it dishwasher safe. Place it on the top rack so water reaches both faces. Hand wash thin or flexible boards to avoid warping.

What should I do about deep knife marks in a plastic board?

Deep knife marks in a plastic board trap food residue and moisture where a sponge cannot reach. Try a brush with hot soapy water or a baking soda paste first. Replace the board when the cuts are deep enough to catch a fingernail.

Read next

Latest articles