# How to Season a Wok

Learn how to season a wok on a gas or electric stove, in the oven, and after washing, with oil choices and simple care steps for carbon steel woks.

To season a wok, you bake a thin layer of oil onto its bare metal. Heating the oil until it smokes repeatedly hardens that layer into a dark, slick surface. The method works on gas, electric and oven heat, with small changes for each. 

- Season a wok only after the metal is bare, clean and fully dry.
- Use a thin coat of oil, because a thick layer stays sticky and gums up.
- Heat the wok until the oil smokes, since that step bonds the oil to the metal.
- Repeat the coating several times until the surface looks dark and feels smooth.
- Dry your wok over heat after every wash, and never leave it damp.
 

## What seasoning does to a carbon steel wok 

Seasoning is the process of bonding a thin film of oil to bare metal. Heat breaks the oil into compounds that link together, a chemical change called polymerization. The new layer fills tiny pores in the metal and makes the surface less reactive. That layer keeps food from sticking and protects the iron from rust. 

A dark color shows the layer has built up, but the color alone does not prove it works. Food that slides off the surface during cooking tells you more than the shade does. Seasoning wears away with scraping, acidic sauces and long soaking. Knowing this helps you repair a wok rather than treat it as ruined. 

Carbon steel is the metal of many traditional woks, and it suits seasoning well. Stainless steel and nonstick pans do not need the same process. Cast iron has a similar coating, but its rules differ in some details. The steps below cover carbon steel woks, the form this guide assumes throughout. 

## Preparing a new wok for its first seasoning 

A new wok often has a factory coating that must come off before seasoning. Scrub the surface with hot water and a little dish soap to remove oil and dust. Some woks arrive with a protective coat that needs a pot of boiling water to loosen. Scouring with a scrub pad may be needed if the coating remains stubborn. 

Once the metal is bare, dry it completely over low heat on the stove. Water left on bare steel can start rust quickly, so drying matters. Wipe the surface with a clean cloth while it is still warm, not scalding. Keep the wok on the burner until the first oil coat goes on. 

Choose an oil with a high smoke point, the heat at which oil begins to smoke. Oils with a low smoke point, such as unrefined ones, can burn and leave a sticky film. The table later in this article compares several oils. Keep the first rounds thin, so the coating forms evenly. 

## Seasoning a wok on a gas stove 

A gas stove heats the sides of the wok as well as its base. The flame rises around the curve, so the metal warms more evenly than on a flat burner. Set the burner to medium-high and let the wok heat empty for a short time. Watch for a faint haze and a shift in the color of the steel. 

Add a little oil and spread it over the inside with tongs and a folded cloth. Keep the cloth away from the flame, since it can catch fire. Wipe the oil thin, then turn off the heat for a moment. Return the wok to the burner and heat it until thin wisps of smoke appear. 

Let the wok cool, then repeat the oil and heat steps several more times. Gas burners can make heat uneven, so move the wok across the flame. A wooden handle can char or crack near an open flame, so keep the flame off it. Stop when the surface looks even and the oil no longer pools. 

## Seasoning a wok on an electric stove 

An electric stove heats a flat ring, so heat reaches the base of the wok first. Heat climbs the sides more slowly than it does on a gas flame. A flat-bottomed wok sits steadily on the ring and spreads heat well. A round-bottomed wok needs a ring stand to stay steady. 

Start on a medium setting and let the base warm before adding oil. Electric elements hold heat well, so you can keep a steady temperature. Spread a thin coat of oil using a cloth folded over tongs. Wait for faint smoke to rise, which signals the oil is bonding. 

Repeat the steps with cooling between coats so the metal does not overheat. Electric stoves can keep the wok hot for a long time after switching off. Lift the wok rather than sliding it across the hot ring, which can scratch the surface. Cool the wok on the stove, then wipe it with a dry cloth. 

## Seasoning a wok in the oven 

Oven seasoning coats the whole wok evenly, including the outside, with a steady heat. Rub a thin layer of oil over every surface, including the handle area if it is metal. Place the wok upside down on a rack, with foil on a lower rung to catch drips. Heat the oven to a moderate setting, then leave the wok inside until the coating darkens. 

Oven seasoning suits a wok with a plain metal handle, not one with wood. Wood can char, crack or catch fire at the heat an oven reaches. Use oven mitts, because the metal stays very hot after the door opens. Let the wok cool fully before lifting it out, and keep children away. 

Some woks need a second round, since the oven heat may not reach every spot evenly. Turn the wok over halfway through if its coating looks patchy. Oven seasoning does not replace stovetop rounds, which you can control more closely. Check the surface after cooling and add stovetop coats if it looks uneven. 

## Cleaning and drying a wok after use 

Cleaning a seasoned wok after use mainly means rinsing it and scrubbing lightly. Hot water removes food without stripping the coating if you avoid harsh scouring. Mild soap can be used sparingly on carbon steel, followed by a thorough rinse. Avoid long soaking, which softens the layer and can start rust. 

Drying is the step that prevents rust, so do not skip it after washing. Set the wok on a low burner and move it until the surface is fully dry. Wipe a light film of oil over the cooled metal to protect it between uses. Store the wok in a dry spot, since damp air can cause rust. 

Short routines like these keep the coating in good shape from one meal to the next. Avoid metal scrapers, which can scratch the layer and expose bare steel. Use a wooden or silicone spatula while cooking to protect the surface. If rust appears, scrub it off and repeat the seasoning steps above. 

- Rinse the wok with hot water right after cooking.
- Scrub with a soft brush or sponge, not steel wool.
- Use a small amount of mild soap only if needed, and rinse well.
- Dry the wok over low heat until no water remains.
- Rub the surface with a little oil once the metal has cooled.
- Store the wok in a dry place, away from damp air.
 

## Choosing an oil for seasoning 

The oil you choose sets how hot you can season the wok without burning the oil. Oils that resist burning stay stable at the heat that bonds the layer. Compare the options in the table below before choosing one for your wok. Ordinary cooking oil from the pantry often works, provided its smoke point is high. 

Refined oils suit high heat, while unrefined oils may burn before the layer forms. Flaxseed oil dries into a hard film, but it can turn sticky if applied thickly. Whatever oil you use, wipe away the excess until the surface looks barely wet. Thin coats bond more evenly than thick ones, which pool and stay tacky. 

Mixing oils is unnecessary, since one oil with a suitable smoke point works. Avoid aerosol cooking sprays, since they can leave a residue on the metal. Store the oil in a closed bottle, away from heat and light, to slow spoiling. Stale oil smells off and forms a poor layer, so replace it when in doubt. 
| Oil | What it does | Points to consider | 
| Refined peanut oil | Tolerates high heat with a mild flavor | Suits the high heat of each seasoning round | 
| Refined vegetable oil | Stays stable at high heat with little flavor | Works as a general choice for every round | 
| Flaxseed oil | Forms a hard, dry film when heated | Can turn sticky if applied in thick coats | 
| Unrefined olive oil | Has a lower smoke point than refined oils | Can burn before the coating forms |  

## Questions about seasoning a wok 

### How often should you re-season a wok? 

Re-seasoning depends on how the wok is used and cleaned. Food that sticks or dull patches that appear are signs that the layer needs a few fresh coats. Scrubbing hard or soaking the wok can strip the layer, so it may need more frequent repair. Check the surface before each meal rather than following a fixed schedule. 

### Can you season a wok in the oven instead of on the stove? 

Yes, an oven can season a wok with a metal handle. Oven coats work well as a supplement to stovetop rounds. Wooden handles should stay out of the oven, since heat can char them. Stovetop rounds still give you more control over each thin coat. 

### Does a wok with a wooden handle need a different method? 

Yes, a wok with a wooden handle needs the stovetop method, kept away from the oven. Keep the handle clear of the flame as much as the burner allows. Wood darkens and weakens when heated, so watch its condition closely. Wipe a thin coat over the metal and avoid resting the handle on hot surfaces. 

### Why does food stick to my wok after seasoning? 

Food sticks when the layer is thin, patchy or damaged by scraping. Too much oil left on the surface can also make food gummy. Low heat during cooking may let food settle before it sears. Repeat the seasoning steps and cook with a little oil at a steady heat. 

### Is it safe to season a wok indoors? 

Yes, seasoning a wok indoors is possible, but it creates smoke and needs airflow. Heated oil can catch fire, so keep a metal lid nearby and never leave the wok unattended. Open a window and run the vent fan before heating. If oil flares, turn off the heat and cover the wok rather than moving it.
