THE LUNCH NOTEBOOK

Stuffing Sausage Casings with a Grinder or KitchenAid

Learn to stuff sausage casings with a meat grinder or KitchenAid attachment, from prepping hog casings to removing air pockets and twisting links.

2 min read8 viewsStuffing Sausage Casings with a Grinder or KitchenAid
— · 0 votes
Contents
  1. Fitting a stuffing tube to a meat grinder
  2. Using the KitchenAid sausage stuffer attachment
  3. Filling hog casings without air pockets
  4. Questions about stuffing sausage casings
  5. How do you twist sausage into links?
  6. Why does my sausage casing keep bursting?
  7. Do you need two people to stuff sausage?
  8. Is a grinder or a separate sausage stuffer better?

Stuffing sausage casings with a grinder or KitchenAid means feeding ground meat through a tube into a casing. The method works with a manual or electric meat grinder and with a KitchenAid stand mixer. Below you will find how to set up each machine, fill the casing evenly, and finish the links.

Fitting a stuffing tube to a meat grinder

To stuff casings with a meat grinder, take out the cutting blade before fitting the stuffing tube. Your manual shows whether the model keeps the plate or uses a stuffing star, a spacer disc. Grind the meat first, then feed it through a second time with the tube attached. Keep fingers out of the feed throat and always use the pusher to move the meat.

Using the KitchenAid sausage stuffer attachment

The KitchenAid sausage stuffer attachment fits onto the food grinder attachment in place of the grinding plate. Remove the cutting blade, slide in the stuffing tube, and tighten the ring by hand. Run the mixer at a low speed to let the casing fill evenly. Chilled meat and metal parts help prevent smeared fat from clogging the tube.

Filling hog casings without air pockets

Hog casings need rinsing and soaking in water before you slide them onto the tube. Gather the casing onto the tube, leave a short tail, and let meat push it off steadily. Air pockets in sausage show as bubbles, which you can prick with a clean pin or sausage pricker. Fill the casing firmly but not tight, leaving slack for twisting the links later.

Questions about stuffing sausage casings

How do you twist sausage into links?

Sausage links are formed by pinching the filled casing at intervals and twisting. Twist the first link forward, then the next one backward, to keep them from unwinding. Tie both ends of the filled coil with a knot or butcher's twine once the links are set.

Why does my sausage casing keep bursting?

Sausage casings burst when they are overfilled or when the meat feeds in too fast. Leave some slack and slow the pusher or mixer speed while filling. Dry or old casings tear more easily, so soak them well before use.

Do you need two people to stuff sausage?

No, one person can stuff sausage, though a helper makes the job easier. One hand feeds the meat with the pusher while the other guides the casing off the tube. A second person lets the first focus on even filling and coiling.

Is a grinder or a separate sausage stuffer better?

A separate piston stuffer, a cylinder that presses meat out with a plunger, gives more control. Grinders and KitchenAid attachments push meat with a turning screw that can warm the fat. For small batches of lunch sausages, a grinder with a stuffing tube does the job well.

Read next

Latest articles