THE LUNCH NOTEBOOK

Dicing Vegetables in a Food Processor

Learn how to dice onions and other vegetables in a food processor, how the pulse function works, and how to avoid uneven pieces with the chopping blade.

7 min read1 views
— · 0 votes
Contents
  1. What dicing means in a food processor
  2. How to dice onions in a food processor
  3. Setting up the bowl and the chopping blade
  4. Using the pulse function for an even dice
  5. Fixing uneven pieces
  6. How machines such as Cuisinart, Ninja and Thermomix differ
  7. Vegetables that dice well and ones to keep out
  8. Cleaning up and packing the dice for lunch
  9. Questions about dicing vegetables in a food processor
  10. Can you dice onions in a food processor without turning them to mush?
  11. How do you dice vegetables in a Cuisinart food processor?
  12. How do you dice vegetables in a Ninja food processor?
  13. How do you dice vegetables in a Thermomix?
  14. Why are my diced vegetables uneven?
  15. Which blade dices vegetables in a food processor?

Dicing vegetables in a food processor means cutting them into rough cubes with short pulses of the chopping blade, not running the machine continuously. You load a batch that fills the bowl partly, pulse a few times, and check the texture between pulses. The result is a quick dice for soups, sauces and lunch fillings, with pieces that are even enough for cooking.

  • Pulse the chopping blade in short bursts and check the bowl between bursts.
  • Cut vegetables into pieces of similar size before they go in the bowl.
  • Fill the bowl partly, not to the top, so the blade can move the food.
  • Drain onions and other wet vegetables after dicing to remove excess liquid.
  • A food processor gives a rough dice, not the clean cubes of a knife.

What dicing means in a food processor

Dicing vegetables in a food processor produces small, rough cubes rather than the sharp-edged cubes a knife makes. The chopping blade sits low in the bowl and cuts whatever falls into its path. Food above the blade is pushed down by gravity and by the next pulse.

The machine cannot see the food, so the size of the finished dice depends on how long you pulse. A few short bursts give a coarse dice with visible pieces. Longer bursts turn the same vegetables into a paste or a puree.

Treat the food processor as a tool for a rough dice and keep the knife for a neat one. For lunch fillings, soups and sauces, the rough dice works well. For a salad where the shape of each cube shows, cut by hand instead.

How to dice onions in a food processor

Dicing onions in a food processor starts with cutting the onion into quarters and peeling off the skin. Trim the root end last, because it holds the layers together while you cut. Drop the quarters into the bowl with the chopping blade in place.

Pulse the machine three or four times in short bursts and look at the bowl. Onions release water as they break, so stop before the pieces turn mushy. Scrape down the sides with a spatula if large pieces stay on top.

Spread the diced onion on a clean towel or a sieve and pat it dry. Removing the extra liquid keeps a sandwich or a packed lunch from turning soggy. A diced onion prepared this way freezes well in a sealed bag.

Setting up the bowl and the chopping blade

The chopping blade, also called the S blade, is the metal blade with two curved edges that sits over the center pin. Place it firmly on the pin before adding any food. Never reach into the bowl while the blade is in place.

Fill the bowl partly, roughly half full, so the blade has room to move the pieces around. An overfilled bowl leaves big chunks at the top and turns the bottom into paste. Cut large vegetables into chunks that fit the bowl loosely.

Lock the lid and the feed tube before you start the machine. Most machines will not run with the lid loose, and a loose lid lets pieces escape. Unplug the machine before you remove the blade or scrape the bowl.

Using the pulse function for an even dice

The pulse function runs the blade only while you hold the button or press it in short taps. Pulsing gives you control over the size of the dice. Continuous running gives you no time to check the texture.

Press the pulse button for one second, release, and shake the bowl gently. Repeat this cycle and open the lid to inspect the pieces after every few pulses. Stop as soon as the pieces reach the size you want.

Different vegetables need different numbers of pulses, so judge by eye rather than by a set count. Firm vegetables such as carrots need more pulses than soft ones such as zucchini. Add soft vegetables last, or dice them in a separate batch.

Fixing uneven pieces

Uneven pieces come from vegetables of different sizes sitting in the same bowl. Large chunks stay near the top while small ones fall to the blade and get overcut. Sorting the vegetables by size before loading solves much of the problem.

Cut everything into chunks of a similar size, roughly the size you want the finished dice to be. Pulse in short bursts and scrape the bowl between bursts. If a few large pieces remain, pick them out and cut them by hand.

Wet or fibrous vegetables, such as onions and mushrooms, break down faster than firm ones. Dice these separately and drain them well. Combining batches at the end gives a more even mix than loading everything at once.

How machines such as Cuisinart, Ninja and Thermomix differ

Cuisinart food processors use a chopping blade and a pulse button in the classic style. Dicing vegetables in a Cuisinart food processor follows the same short-pulse method as any bowl-and-blade machine. Some models add a dedicated dicing disc that cuts cubes as food passes through.

Ninja machines often have a tall, narrow bowl and stacked blades. Dicing vegetables in a Ninja food processor calls for smaller batches, because the narrow bowl packs food tightly around the blades. Short pulses and a shake between them keep the pieces even.

A Thermomix combines heating and stirring with chopping, and dicing vegetables in a Thermomix relies on its chopping speed settings. The machine chops fast, so check the bowl after each short burst. The same principle applies across brands: pulse, check and stop early.

Vegetables that dice well and ones to keep out

Firm vegetables dice well in a food processor, including carrots, celery, peppers, zucchini and onions. These hold their shape through a few pulses and release little water. Cut them into similar chunks and pulse in small batches.

Soft herbs, tomatoes and cooked vegetables turn to pulp quickly and are better chopped by hand or with very brief pulses. Potatoes release starch and can turn gluey in the bowl, so dice them with care. Very fibrous vegetables such as leeks need a light touch.

Dice one type of vegetable per batch and combine them afterward. This keeps the texture of each vegetable under control. Mixed batches are where uneven dice and mush come from.

Cleaning up and packing the dice for lunch

Unplug the food processor before cleaning, then remove the blade by its plastic hub. Wash the bowl and blade in warm soapy water, or place them on the top rack of a dishwasher if the maker allows it. Rinse and dry the blade at once to protect its edge.

Pack diced vegetables in a sealed container with a piece of paper towel to absorb moisture. Keep wet vegetables such as onions separate from bread and crackers. Diced vegetables hold their texture better when the container is not packed tight.

Label the container with the vegetable and the date you diced it. Use the dice within a few days for the freshest texture. Freeze extra batches flat in bags for later soups and stews.

Questions about dicing vegetables in a food processor

Can you dice onions in a food processor without turning them to mush?

Yes, onions dice well in a food processor if you pulse in short bursts and stop early. Quarter and peel the onion, then pulse three or four times and check the bowl. Onions release water, so drain the dice on a towel before packing it.

How do you dice vegetables in a Cuisinart food processor?

Dicing vegetables in a Cuisinart food processor uses the chopping blade and the pulse button. Load partly full batches of similar-sized chunks and pulse in short bursts. Some Cuisinart models also offer a dicing disc that cuts cubes as food passes through.

How do you dice vegetables in a Ninja food processor?

A Ninja food processor dices vegetables with the same short-pulse method as other machines. The tall, narrow bowl packs food tightly, so use smaller batches and shake the bowl between pulses. Check the texture often because the stacked blades cut fast.

How do you dice vegetables in a Thermomix?

A Thermomix dices vegetables using its chopping speed settings for short bursts. Add chunks of a similar size and check the bowl after each burst. The machine chops quickly, so stop before the pieces turn to puree.

Why are my diced vegetables uneven?

Uneven dice come from mixing vegetables of different sizes and firmness in one batch. Cut everything into similar chunks and pulse in short bursts with a shake between them. Dice soft vegetables separately and combine the batches at the end.

Which blade dices vegetables in a food processor?

The chopping blade, often called the S blade, does the dicing in a standard food processor. It sits over the center pin and cuts food that falls into its path. A dedicated dicing disc, where fitted, cuts cubes as food passes through the feed tube.

Read next

Latest articles